Rockboard MOD 3 V2 TRS & XLR Pat B-Stock

B-Stock with Full Warranty
Return that may have slight traces of use.

All-in-one patch-bay for pedalboards

Suitable for MOD Slots in RockBoard Pedalboards
Compatible with a wide range of other pedalboards
Acts as a central access point to the effect setup
Establishes clear cable routes to and from the pedalboard
Removable front panel for mounting on or under pedalboards
3x 6.3 mm TRS thru
2x XLR thru (male front / female rear)
1x XLR thru (female front / male back)
1x DC 2.1 x 5.5 mm hollow plug thru
1x AC IEC thru (male front / female rear)
All connections mirrored on the rear side
Dimensions with front panel (W x D x H): 175 x 85 x 47 mm
Dimensions without front panel (W x D x H): 160 x 85 x 33 mm
Weight: 450 g
Includes mounting screws, lock nuts and TX wrench

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

30 30-Day Money-Back Guarantee

Available since August 2019

Item number 492865

Sales Unit 1 piece(s)

Also available as brand new product $63

$58

The shipping costs are calculated on the checkout page.

Sales Rank

in Pedalboard Accessories

Practical patchbay module

The RockBoard MOD 3 V2 is a practical patchbay module for acoustic guitarists and vocalists, which consolidates all the necessary connections of a pedalboard in one central access point, thus shortening cable paths and providing users with a better overview of their entire effects setup. The MOD 3 V2 is equipped with an XLR input and two XLR outputs to provide a multitude of options for balanced audio signals, including a vocal setup with stereo effects. The module also comes with three jack connections as well as a DC and an AC IEC mains connection for delivering power to the multi-power supply under the board.

Flexible routing options

The jack connections (A-C) and XLR connections (1-3) on the RockBoard MOD 3 V2 are wired from the front to the rear of the module courtesy of the pass-through design, thus allowing various configurations. Vocalists can connect any microphone to the XLR input and use the XLR outputs to send the stereo signal from an effects processor on their pedalboard to a mixing console. Acoustic guitarists have the option of attaching a DI box to their pedalboard or even integrating delay and reverb effects into the effects loop of their acoustic amplifier.

For acoustic musicians and vocalists

The RockBoard MOD 3 V2 is the perfect enhancement for any pedalboard. As a flexible patchbay for TRS, XLR, DC, and AC IEC connections, it enables all connections to be organised in one convenient module and provides clearer and neater cable routes to the exterior of the pedalboard. The MOD 3 V2 is the ideal solution for vocalists looking to transmit a balanced stereo audio signal from their effects setup to a mixing console, but also for acoustic guitarists who use a DI box or rely on an acoustic amplifier for their performance. Both DC and AC IEC mains connections add the perfect finishing touches to the patchbay concept.

RockBoard MOD 3 V2 patchbay for pedalboards

About RockBoard

RockBoard is a brand belonging to Warwick Music Distribution GmbH, which is based in Markneukirchen in Germany's Vogtland region. RockBoard's range focuses on pedalboards, which are available in numerous different designs to suit any application and budget, and are complemented by an extensive range of pedalboard accessories, from slick patchbays for expanding the boards and high-quality patch cables for loss-free connection through to high-performance power adapters and the "QuickMount system" for rapid effect changes. In short, RockBoard offers virtually everything that players need to easily set up their own individual pedalboard.

For mounting in MOD slots

Users of RockBoard pedalboards from the TRES, QUAD, and CINQUE series will ideally mount the MOD 3 V2 in the dedicated MOD slot, which is built into the front of the board and ensures a secure means of attachment. Alternatively, the front panel can be removed, allowing the module to be mounted on or underneath pedalboards using self-adhesive hook and loop tape. A robust MOD rack is also available from the manufacturer as an optional extra, which allows the module to be used with pedalboards from alternative providers and can be adjusted to accommodate different mounting directions and positions according to the design of the pedalboard.

Served with love!