To the page content

Fender Am Perf. Strat Neck RW

17

Stratocaster Neck

  • Neck: Maple
  • Fretboard: Rosewood
  • White dot fretboard inlays
  • Neck profile: Modern "C
  • Fretboard radius: 241 mm (9.5")
  • Nut width: 42.8 mm (1.685")
  • Synthetic bone nut
  • 22 Jumbo frets
  • Finish: Matt urethane lacquer
  • Colour: Natural
Available since June 2022
Item number 536620
Sales Unit 1 piece(s)
Model ST-Style
Strings (Number) 6
Material Neck Maple
Material Fingerboard Rosewood
Scale (in mm) 648 mm
Nut Width (in mm) 428 mm
Frets / Location (Number) 22
Fretless No
Varnished Yes
B-Stock from $299 available
$322
The shipping costs are calculated on the checkout page.
Available at short notice (usually 2-5 days)
Available at short notice (usually 2-5 days)

This product has been ordered and is expected to arrives in the next few days.

Standard Delivery Times
1

17 Customer ratings

4.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

14 Reviews

l
Really nice replacement Neck
loechti 05.03.2024
Got this one for my swamp ash stratocaster project. Very well made, there where no issues with frets or any other parts of the neck. The edges very nicely rounded - not as extreme as in some others, but very comfortable. Also the satin finish is very nice. I personally am very satisfied, no issues on mine. (But always check that the frets are fine etc.)

Be aware: The nut is not completely filed. Its normal with Fender replacement necks that the nut slots are very high, this is something so you can adapt it to your guitar! If you don't have nut files, I would consider getting some or using fine sandpaper wrapped around strings, to deepen the grooves.
quality
0
0
Report

Report

S
Fabulous Neck
Stephen662 11.04.2024
Building my partcaster I wanted to go with genuine Fender Parts. Straight out of the box this neck checks out as perfect: A lovely grain and colour consitency to the Rose Wood finger board. Dead straight, a perfect back so the neck with an incredible smooth feel. The frets are wonderfully polished and no sharp ends. This was most definately worth the wait (as it was on back order). I feel en epic Strat coming on. Value for money very good. I know you can probably buy a whole guitar for the price of this neck (not a fender guitar of course), but this will make a guitar to compete with a high end factory model. All the holes pre-drilled, and as I say no (or perhaps very little - I'll see when it's strung up) fettling to do. I'd be very suprised if I have to touch the frets as they show perfectly level. The nut is pre-slotted /guide cut to allow filling the nut to accept your guage of strings; very littlework required with a setofnut files. The heel is perfectly machined and care has been taken to leave no burrs or high spots. Congratulations to Fender on blowing me away with this product.
quality
0
0
Report

Report

GK
High quality, great feel
Ged Karwecki 01.09.2023
Fitted on my Squier CV 50s Tele. Perfect fit, no extra effort needed. Very pleased with fret and fretboard quality and how it feels. Although tall frets was something new to me and needed some adaptation. Very happy with the neck.
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
H
Leider nicht wie erwartet
Hayakusa 23.08.2022
Für mich war von allen Neck-Specs, dieser hier eigentlich der genau Optimale. Also nach langem Überlegen gekauft und sehnsüchtig gewartet. Mit der Lieferung und meinem anschließendem Besuch beim Gitarrenbauer kam die Ernüchterung: der Hals hatte Mängel. Das extrem trockene Griffbrett mitsamt einer sehr unschönenen löchernden Maserung war noch zu verkraften, allerdings war das Loch für die Halsstab-Einstellung echt nicht in Ordnung. Hier wurde in der Fabrik unsauber gearbeitet, das komplette Loch war voll mit Holzspänen - aber nicht etwa leicht entfernbare, sondern direkte (noch hängende) Splitter der Lochborung selbst. Das bedeutet, mein Git-Bauer kam erst nicht an die Einstellungsschraube, und hatte auch echt Probleme das Loch frei zu bekommen.

Er selbst nahm den Hals in die Hand und sagte sofort: schick es zurück!!! Aber ich war so auf Gitarrenentzug, dass ich Ihn trotzdem hab anbauen lassen. Fehler. Er spielte sich nicht so wie erhofft und letztendlich hab ich Ihn wieder verkauft. Mit Umbau ca. 150-200€ Verlust gemacht.

Also Wenn Ihr den Hals bestellt, schaut auf jedenfall genau auf das Halsstab-Einstellungs-Loch.

Bleibt Happy!
quality
9
4
Report

Report