To the page content

Cordial CMK 422 Twin

353

Professional Zwilling's Cable (sold by the meter)

The use of twin microphone lines often shortens the set-up times of modern audio equipment significantly and provides an overview in complex structures. Stereo inputs and outputs of mixers, effects units and master machines can be connected with a cable installation. Very good electrical values ​​also allow use as stereo main microphone wiring.

  • Conductor cross section: 2x 0.22 mm²
  • Conductor construction: 28 x 0.10 mm Bare copper
  • Conductor insulation PE
  • Double-braided shielding of copper wire
  • Overall casing: PVC
  • Overall diameter: 3.9 x 8.2 ± 0.4 mm
  • Weight: 41 g / m
  • Operating temperature ranges: - 5 ° C to + 70 ° C, non-moving -20 ° C to + 70 ° C
  • Conductor resistance: 85 ohms / km
  • Capacitance (conductor / conductor): 85 pF / m
  • Capacity (conductor / screen): 150 pF / m
  • Test voltage (core / wire): 750 V eff
  • Colour: Black
  • Price per meter
Available since January 2000
Item number 131754
Sales Unit 1 metre(s)
Colour Black
Diameter 0,22 mm²
$1.95
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

353 Customer ratings

4.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

138 Reviews

J
Good cable for studio
JensWel 23.04.2020
Just soldered a few more St. Jack to St. jack for cabling studio. No hazzles, this cable just works :)
quality
0
0
Report

Report

B
As good as a large one
Bronson 10.01.2022
This cable has the same features as his bigger (diameter) brother. I use it for drums to kickdrum in + out and for snare top + bottom in one cable, love it.
quality
0
0
Report

Report

R
Great cable
Rihards 23.08.2021
So far I'm using this for an extension cable with Neutrik NTP3 RC and Rean NYS 240 jacks. The whole thing fits together well and feels very sturdy.
Takes solder easily, so working it was quite easy.
I have no complaints so far, but I've only used it for a short extension cable.
quality
0
0
Report

Report

S
Usual Cordial top quality
SiWatts 16.01.2014
I like cordial cable... it is easy to solder and the sheathing is normally simple to cut and doesn't tend to burn like so many do.

If I had to grumble, there would be three things that niggled...

The sheath/outer is more rubbery than all the other cordial cable I have so doesn't coil so easily.
When applying heatshrink, the outer sheathing seems quite susceptible to the heat and it glosses over as if melting. Keep the heat low enough to just shrink your heatshrink and you should be ok.
There is no indication of which cable is which (once connectors installed) except to trace the "printing" which may become faded after time.

I made up this cable as a 10m balanced stereo supply for keyboard DI box to mixer and whilst not critical, it would be nice to be able to identify the two channels more easily WITHOUT needing to use colour coded connectors. Otherwise, a good cable and up to the usual cordial standard.
quality
1
0
Report

Report