To the page content

Behringer PS400

296

Phantom power adapter

  • Selectable +12 / +48 V phantom power voltage
  • Suitable for all condenser microphones
  • XLR Female input (mic input) and XLR male output (mic thru)
  • Very low-noise sound
  • Including 12 Volt DC power adapter
Available since March 2006
Item number 191611
Sales Unit 1 piece(s)
Phantom Power Adapter and Feed Units No
Phantom Power Adapter No
Phantom power Yes
$23.90
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

296 Customer ratings

4.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

109 Reviews

M
PS400 Phantomsupply: .....
MicroSoundLiker 14.04.2019
Just recently bought the PS400 for supplying phantom voltage to various condensor microphones. In brief: rugid built, however not meeting decent electrical specifications.
- Output voltage (unloaded) equals 12V in 12V-mode, but only 31V in 48V-mode, i.e. much too low! A short check of the internal electronic circuits shows a multi-diode trippler, thus limiting the output to 3x the input voltage, i.e. 36V max. It never will/can reach 48V, as claimed!
- The output voltage STRONGLY depends on microphone current drawing! E.g. in 12V-mode the voltage drops from its unloaded 12.0V to 10.4V (at 5 mA) and 8.5V (at 10mA).
But much more serious in 48V-mode: from 31V (unl.) to 22V (at 0.7 mA) and 12.5V (at 2 mA)! Note that common microphones typ. require 2-5 mA at 48V!
- Noise level is OK, both at 12V (adapter) as well as 9V (battery); at 9V unloaded output voltage is just 9V or 25V (select switch 12V- or 48V-mode).
Fazit: at "48V" setting the unit can not be used. Likely many people will be affected by this deficit, without knowing.
quality
8
1
Report

Report

SK
Great Purchase
Shauna K. 06.07.2015
I bought this cheap little behringer device to provide phantom power to my condensor mic so that I would be able to use it in a live situation. Based on all the reviews I read I decided that the Behringer Ps400 would be more than adept to doing this for me. At first I thought that it wasn't working at all but once I realised that there was two options for voltage I soon sorted that problem. It has been a really good purchase for me and I now use it on a weekly basis whilst gigging. It is a very tidy and sturdy unit that has been bumped and dropped on numerous occasions and still works fine.
A really good purchase and major thanks to Thomann for providing me with a free travel adaptor too!
quality
1
0
Report

Report

A
Excellent Unit
AnthonyO 07.11.2019
I use this to power a mic that needs phantom power, I use a mixer that does not suppl this and this unit works great,
quality
0
0
Report

Report

A
Good
Anonymous 07.01.2017
I use it on stage for my saxophone mic(Akg C519).Because some mixers haven't phantom power.It's very good quality,i like it.
quality
0
0
Report

Report

YouTube on this topic