To the page content
seventy years logo
Join Thomann's Anniversary! We reward your loyalty with special offers! Get your deals

t.akustik HiLo-P80

716

Pyramid Foam Absorber

  • Material: HiLo-F acoustic foam made of polyurethane with high rigidity and low density
  • Main frequency range: from 800 Hz
  • Pyramid height: 60 mm
  • Total height: 80 mm
  • Bulk density 16.5 ± 1.0 kg / m³
  • Compression hardness at 40 % deformation 4.0 ± 0.7 kPa
  • Tensile strength: Minimum 100 kPa
  • Elongation at break: Minimum 80 %
  • Flame retardant according to MVSS 302 = SE (self-extinguishing)
  • Sheet size: 1000 x 500 x 80 mm
  • Priced per piece
  • Suitable adhesive: Article no. 481723 (not included)
Available since May 2013
Item number 315594
Sales Unit 1 piece(s)
Material Acoustic Foam
Colour Gray
Dimensions per piece in mm 1000 x 500 x 80
$12.80
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

716 Customer ratings

4.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

335 Reviews

G
Does the job
G-MEC 01.10.2020
Works well as a broadband absorber!

Pros:
Great price/quality.

Cons:
Not aesthetically high end but you can live with it.

For those complaining about low frequencies and soundproofing, get your act together - This is not a bass trap and you won't be able to soundproof a room simply by slapping stuff on the walls.
quality
7
0
Report

Report

DO
Great For home studios
Darren O. 10.07.2015
Not for sound proofing!

So i bought 2 sheets of this to make a microphone shield and some other stuff. I ended up having a spare sheet so i put it up on the wall which looks great and is quite useful.

Before i built the mic shield i put my amp into a box and padded up the inside of the box with the foam and tracked some guitar. It work well stopping reflections and minimizing outside noise.

I also tracked some vocals with a sheet up on the wall and the mic in front on the foam, which also work extremely well to my ears with no audible reflections.


I then tested the frequency response of my vocal microphone without any foam in the room and then the foam in front of the the microphone.

My results were almost identical form 0hz to 15khz.

This foam is mostly useful for targeting to those higher frequencies. If your looking for something to kill room modes or sound proofing, look else where.

If you are looking for something to use in an isolation box or a cool decoration or to dampen reflections this is a good starting point.
quality
2
1
Report

Report

J
Nice adition to my back wall.
JoneKone 16.12.2021
I have 3 of these sheets in my home and I'm very pleased.
quality
1
0
Report

Report

J
Surprisingly efficient damping!
Johannes924 28.04.2017
Honestly I didn't expect much, but they were cheap and I figured they at least wouldn't make the acoustic properties of my smallish home studio any worse. In parallel with purchasing these panels, I built myself a couple of large corner basstraps using heavy rockwool, and I did quite a bit of testing to find the best placement on walls and ceiling. Combined the acoustic treatment of my studio has done wonders, and the previous nasty echoes are gone. We now use the studio for band rehearsals, recording and mixing, and the sound is a lot more balanced than it used to be. Even drum recordings sound sound pretty darn good!

One warning: They are somewhat delicate and will rip when abused!
quality
2
0
Report

Report