To the page content

22.11 - 02.12

cyberweek-deal

Stairville PCD-3 Power Twist Distributor

37

This item runs exclusively on an operating voltage of 230 V and therefore requires a voltage transformer to run in your country of United States.

3-Way Power Distributor with Power Twist Input and Output

  • Ideal for power supply on stage or in the rig
  • Sturdy metal housing with flight option for the truss (2x M10 internal thread)
  • Power Twist input and output
  • 3 Protective contact sockets with covers
  • Conductor cross-section: 1.5 mm²
  • Dimensions: 205 x 73 x 63 mm
  • Weight: 0.6 kg
Available since May 2015
Item number 358061
Sales Unit 1 piece(s)
Colour Black
Wire Diameter 1,5 mm²
Lenght [m] 0 m
Input Power Twist Blue male
Power socket outputs 3
Euro plug outputs 0
USB Outputs 0
PowerTwist Outputs 1
PowerTwist TR1 Output 0
IEC Outputs 0
UK Plug outputs 0
Switch No
Voltage protection No
Rack unit No
$58
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

37 Customer ratings

4.9 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

19 Reviews

Ł
Sturdy but very tall
Łukasz 25.05.2020
Works as intended, very solid metal case, thick plastic sockets. The sockets are Type F: they are grounded but without a ground prong. The ground is clamped on both ends of the connector.

I haven't quite seen this by the pictures alone but the distributor is an entire 5.5cm tall from the ground to where the socket starts. Regular power extenders are 2cm from ground to socket base.

Luckily this was fine for my use case but make sure to measure, especially that the socket covers occupy additional space.

In case you were wondering, the sockets are indeed square but the internal wiring is cut to length so you cannot rotate them. Even if you could, there is not enough space for the socket cover holder when rotated.
0
0
Report

Report

e
Quality product
erbe 29.12.2021
Quality and robust product in the metal case.Neutrik connectors. I have more pcs, all without problems.
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
M
Professioneller Bühnenstrom
Mr20Hz 07.01.2019
Ich habe mir zwei von diesen Verteilern gekauft um sowohl mein Rack (Bassamp) als auch mein Pedalboard mit Strom zu versorgen.
Vom Bassamp schleife ich nun einfach auf das Pedalboard weiter und habe keinen Ärger mehr mit eventuell nicht vorhandenem Bühnenstrom und auch nicht mehr das Gefummel mit Standard Mehrfachsteckdosen. Den Mit Hilfe der Gewindebuchsen und einer Gewindereduzierbuchse sind die Verteiler im Rack und im Pedalbord bombenfest fixiert. Besser geht es nicht.
2
0
Report

Report

google translate fr
Unfortunately there was an error. Please try again later.
FJ
Robuste, bien construit, parfait
Franck J. 18.09.2015
Existe en 3 et 6 PC16. Toujours le petit regret qu'il n'existe pas de version purement française, mais 95% de mes prises sont compatibles, et j'ai des adaptateurs pour le reste.
Bien respecter à ne pas dépasser les 16A en cas de chaînage, mais avec la possibilité de mettre la rallonge Powercon de la longueur qu'on veut, c'est très pratique. Sur un pont, pour la distribution du PC Direct pour les machines à LEDs par exemple, c'est imbattable. Et mettre en chaîne ne mange pas une prise à chaque fois, comme sur les barrettes "traditionnelles".
Je vais petit à petit remplacer mes vieilles barrettes de prises en plastique blanc, de moins en moins autorisées...
1
0
Report

Report