To the page content
compare-box

KMA Audio Machines Endgame Duality Calibrator

3

Effect Pedal for Electric Guitar and Electric Bass

  • Flexible and comprehensive solution for the end of every signal chain
  • Integrated stereo FX loop
  • Proprietary KMA True Double Tracker (TDT) Doppler
  • DUAL-IR-Loader
  • Auxiliary input (also via Bluetooth)
  • Extensive metering options
  • True bypass
  • Controls: CAB IR, TDT Width, Ambience, AUX Mix, Input Gain, Dual Headphone Output Level, XLR Output Level
  • Push buttons: BT Pair
  • Switches: Power Amp Mode, Dual IR Cabinet Simulation Pre/Post, True Double Tracking Pre/Post, Ground Lift
  • LED: Effect On, FX LOOP, DOUBLER, Input Clip, Power Amp Mode, BT Link
  • Footswitch: FX LOOP, DOUBLER
  • Input: 6.3 mm jack
  • Thru: 6.3 mm jack
  • Stereo FX loop (send/return L/R): 4 x 6.3 mm jack
  • Output: 6.3 mm jack plug
  • Fully balanced output L/R: 2 x XLR
  • Dual headphone outputs: 2 x 3.5 mm jack
  • AUX input: 3.5 mm jack
  • USB C
  • Power supply via 9 V DC mains adapter (2.1 x 5.5 mm barrel connector, centre negative) - suitable power supply: Art. 409939 (not included)
  • Dimensions (W x D x H): 121 x 105 x 74 mm
  • Weight: 490 g
  • Handmade in Germany

Note: no battery operation possible

Available since June 2024
Item number 585314
Sales Unit 1 piece(s)
Effect Types Doubler
Multi-Channel Unit 1
Channels 2
Active / Passive Active
Gnd/Lift switchable 1
Speaker Simulation 1
Show more
$349
The shipping costs are calculated on the checkout page.
In stock
1
Need help?
Contact
Contact
Contact

3 Customer ratings

4.3 / 5
Rate now

handling

features

sound

quality

3 Reviews

k
More than decent "no amp" pedalboard solution with some shortcomings
kxszander 04.08.2024
I was intrigued by this pedal when I saw a YouTube video about this at the NAMM-show. Poweramp and cab sim/IR plus a doubler, a ton of mono/stereo I/O options, FX-loop galore and eminently usable with headphones.

It is a bit of a peculiar combination of features, but as an "amp substitute" at the end of the FX-chain on your pedalboard, it sounds good: it handles pedals well, the switchable loop at the end of the chain is a nifty touch and the speaker/cab models the pedal has on offer are on point.

Now; the pedal, 9V and reasonable in terms of power consumption, is quite bulky and some of the features/buttons are somewhat hidden under the hood. A good read of the manual is advisable to unlock the full potential.

Moreover, if I were to shoot this thing out against the Strymon Iridium, the DSM & Humboldt Simplifier or the Atomic AmpliFire, I think the Endgame would have difficulty keeping up with the competition, especially in terms of tweaking of the amp sounds, size and options. At a comparable price.

All things considered, I like this pedal – especially the build-quality and look, but I don't think it is sufficiently usable and kick-ass sounding that it will replace the current "no amp" I have on my pedalboard.
I was intrigued by this pedal when I saw a YouTube video about this at the NAMM-show. Poweramp and cab sim/IR plus a doubler, a ton of mono/stereo I/O options, FX-loop galore and eminently usable with headphones.

It is a bit of a peculiar combination of features, but as an "amp substitute" at the end of the FX-chain on your pedalboard, it sounds good: it
I was intrigued by this pedal when I saw a YouTube video about this at the NAMM-show. Poweramp and cab sim/IR plus a doubler, a ton of mono/stereo I/O options, FX-loop galore and eminently usable with headphones.

It is a bit of a peculiar combination of features, but as an "amp substitute" at the end of the FX-chain on your pedalboard, it sounds good: it handles pedals well, the switchable loop at the end of the chain is a nifty touch and the speaker/cab models the pedal has on offer are on point.

Now; the pedal, 9V and reasonable in terms of power consumption, is quite bulky and some of the features/buttons are somewhat hidden under the hood. A good read of the manual is advisable to unlock the full potential.

Moreover, if I were to shoot this thing out against the Strymon Iridium, the DSM & Humboldt Simplifier or the Atomic AmpliFire, I think the Endgame would have difficulty keeping up with the competition, especially in terms of tweaking of the amp sounds, size and options. At a comparable price.

All things considered, I like this pedal – especially the build-quality and look, but I don't think it is sufficiently usable and kick-ass sounding that it will replace the current "no amp" I have on my pedalboard.
handling
features
sound
quality
1
6
Report

Report

JV
Perfect all around end of chain solution
Joris VD 12.10.2024
Nice double tracker, great bluetooth functionality for backing tracks, Good quality FX loop. This pedal does alot, but at a high price.

My only gripe with the pedal is the fact that the amp simp isn't the quality I had hoped for, otherwise it's an awesome pedal.
handling
features
sound
quality
2
2
Report

Report

google translate fr
Unfortunately there was an error. Please try again later.
NZ
Plus qu'une simulation d'ampli More than an amp simulation
Nicolas Z. 11.09.2024
Une pédale fabriquée a la main, d'excellente qualité.
L'utilisation semble simple au premier abord mais un tour sur le manuel d'utilisation du site du fabricant est essentiel pour en comprendre les possibilités.
La pédale dispose de plusieurs simulations de baffles, de préampli, qui peuvent être également désactivés si l'on veut en utiliser externes. Les simulations sont de très bonnes qualités.
Possibilité d'input mono ou stereo, ainsi qu'une boucle d'effet stereo.
Sortie stereo jack ou XLR (niveau de sortie réglable uniquement sur xlr).
Doubler stereo d'excellente qualité (pas de problème de phase) avec un expander de stereo.
Possibilité de placer le doubleur ainsi que la boucle d'effet avant ou après le baffle.
5 simulations de baffles chargées dans la pédale dont 2 modifiables en chargeant par USB.

Point négatif non négligeable selon moi: absence d'EQ et manque d'aigue et de brillance dans l'ensemble des simulations. Problème réglé pour ma part avec un simple EQ mxr 6 bandes.

Dans l'ensemble ça reste une excellente pédale.
Bien lire le manuel du fabricant qui est simple d'accès pour comprendre son potentiel
Une pédale fabriquée a la main, d'excellente qualité.
L'utilisation semble simple au premier abord mais un tour sur le manuel d'utilisation du site du fabricant est essentiel pour en comprendre les possibilités.
La pédale dispose de plusieurs simulations de baffles, de préampli, qui peuvent être également désactivés si l'on veut en utiliser externes. Les
Une pédale fabriquée a la main, d'excellente qualité.
L'utilisation semble simple au premier abord mais un tour sur le manuel d'utilisation du site du fabricant est essentiel pour en comprendre les possibilités.
La pédale dispose de plusieurs simulations de baffles, de préampli, qui peuvent être également désactivés si l'on veut en utiliser externes. Les simulations sont de très bonnes qualités.
Possibilité d'input mono ou stereo, ainsi qu'une boucle d'effet stereo.
Sortie stereo jack ou XLR (niveau de sortie réglable uniquement sur xlr).
Doubler stereo d'excellente qualité (pas de problème de phase) avec un expander de stereo.
Possibilité de placer le doubleur ainsi que la boucle d'effet avant ou après le baffle.
5 simulations de baffles chargées dans la pédale dont 2 modifiables en chargeant par USB.

Point négatif non négligeable selon moi: absence d'EQ et manque d'aigue et de brillance dans l'ensemble des simulations. Problème réglé pour ma part avec un simple EQ mxr 6 bandes.

Dans l'ensemble ça reste une excellente pédale.
Bien lire le manuel du fabricant qui est simple d'accès pour comprendre son potentiel
A hand-made pedal of excellent quality. The use seems simple at first glance but a look at the user manual on the manufacturer's website is essential to understand its possibilities. The pedal has several speaker and preamp simulations, which can also be disabled if you want to use external ones. The simulations are of very good quality. Possibility of mono or stereo input, as well as a stereo effects loop. Stereo jack or XLR output (adjustable output level only on XLR). Excellent quality stereo doubler (no phase problem) with a stereo expander. Possibility of placing the doubler as well as the effects loop before or after the speaker. 5 speaker simulations loaded into the pedal, 2 of which can be modified by loading via USB. A significant negative point in my opinion: no EQ and lack of treble and brilliance in all the simulations. Problem solved for me with a simple 6-band MXR EQ. Overall it remains an excellent pedal. Read the manufacturer's manual carefully, which is easy to access, to understand its potential.
handling
features
sound
quality
5
0
Report

Report