Doepfer MCV4

This item runs exclusively on an operating voltage of 230 V and therefore requires a voltage transformer to run in your country of United States.

Midi-CV / gate interfaceMCV4 is a low-cost MIDI-to-CV interface that allows monophonic synthesizers to be controlled via MIDI.

This interface converts MIDI information into 4 control voltages and one gate. It has an external plug-in power supply. It is important that the first control voltage and the gate are always set to MIDI note events, with the pitch bender being converted to the first CV. The remaining CVs can be used to control further parameters of an older synthesiser in the sequencer, e.g. filter modulations. The 3 control voltages can be controlled via MIDI controllers. The interface receives an adjustable MIDI channel, which means that looping the MIDI signal makes sense.

Two jacks for CV1 / 2 and CV3 / 4
Jack for Gate / Trigger
Learning button with LED for setting the MIDI channel
Optical display of the gate / trigger function via LED
MIDI-in, MIDI-Thru connection
Metal housing
Dimensions: 95 x 75 x 35 mm
Power connection: 7-12V / 100 mA

30-Day Money-Back Guarantee

3-Year Thomann Warranty

Available since March 2002

Item number 153374

Sales Unit 1 piece(s)

Wireless MIDI No

Midi Thru No

MIDI Merge No

MIDI Controller No

MIDI Converter / Interface Yes

MIDI Elektronic No

$104

The shipping costs are calculated on the checkout page.

Sales Rank

in MIDI Tools

This is what customers who viewed this product bought

Kenton Pro Solo MkIII

38 Customer ratings

5 29 Customers 4 5 Customers 3 2 Customers 2 1 Customer 1 1 Customer

4.6 / 5

handling

features

quality

Review guidelines

20 Reviews

Dependable and Solid

Damian T. 17.12.2013

I use this unit to trigger sounds on my Roland SH101. The 101 only responds with certain octaves so I'm glad the unit has an LED that lights up when midi notes are sent to it so If I get no response from the synth I can quickly figure out where I've gone wrong.
Set up is very easy. You can change what midi channel the unit responds to by holding down the Gate/Learn button until the LED flashes, send it any midi note on the channel you want it to listen to, the flashing stops and now it only listens to that channel.
It can also do other tricks such as transposing notes but I never had any need for these functions, if you do start experimenting with it settings and get confused, it's very easy to return it to factory settings.

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

too simple

Matthew N. 02.07.2014

as midi to CV converters go this is the most simplistic and cheapest (well maybe not now) of them all.

its solid and reliable CV out is very stable and accurate (for note pitch) trigger time is very quick in some ways it never lets me down but it doesn't quite cover what can be done with Midi to CV. Firstly you need a dual mono 3.5mm to TRS jack cable to get the CV out (not easy to find) then it needs Midi messages to be set up IE which Midi message you Want to be converted. also 0-5 V Cv output only common but it limiting especially for the control voltages which need to be 0-10v for a full sweep.

Report

Terrible

ekoloud 26.12.2017

i can control the notes and pitch on my sh 101 but can t use cv 2, 3 or 4 if, for instance i want to control the filter on a jupiter 6. tried several configurations and nothing. im using ableteon. could be me or the software. if its me than this product as terrible user interface and its not easy at all to use. not recommended

Report

Show translation

Show original

Unfortunately there was an error. Please try again later.

Chufu 08.03.2014

Jetzt hab ich so nen schönen alten (von 1978) MS20 und will den in mein Digitales Equipment einbauen. Zu mindest sollte ich mit der DAW Sequenzen an den MS20 senden können. Jetzt brauch ich eine Schnittstelle zum MS20. Das MCV4 von Döpfer ist das einzige bezahlbare Interface auf dem Markt. So weit ich das Recherschiert habe. Der kleine Kasten tut genau das was er soll. Er konvertiert Midi-Signale in Kontrollspannungen. Eine CV(Control Voltage) wird zur steuerung der Tonhöhe verwendet. Ein Triggeraufgang ist auch vorhanden. Den kann man gegebenen falls an den zu steuernden Synthezizer angepasst werden. Dazu wird der MCV4 in den richtigen Modus geschaltet beziehungsweise intern gejumpert. Schon kann es los gehen. Die Anderen CV's sind ebenfalls fest zugewiesen. Eine CV reagiert auf Aftertouch-Signale. Eine Andere auf Velocity und wieder einer Anderen kann man einen externen Kontroller zuweisen.

Das Gerät ist vielseiteig und flexiebel einsetztbar auch für verschiedene Analogsynthesizer. Die Kontrollspannungen sind flexibel Konfigurierbar.
Die MIDI True Buchse ist weniger brauchbar da sie mit einigen latenzen zu kämpfen hat aber ich steuere das ganze so wie so über einen MIDI2USB Adapter an. Das klappt sehr gut.
Die Bedienungsanleitung beschränkt sich auf das wesentliche. Das war die Vorlage für mein kleines VSTi-Programm.

Die Bedienung ist etwas kompliziert da man alle Einstellungen über MIDI vornehmen muss. Deshalb habe ich mir ein kleines VSTi-Pluging für meine DAW programmiert was die Bedienung und die Einbindung in meine DAW doch um einiges erleichtert. So etwas fehlt dem MCV4.

Report

Read all reviews

Doepfer MCV4

Midi-CV / gate interfaceMCV4 is a low-cost MIDI-to-CV interface that allows monophonic synthesizers to be controlled via MIDI.

This is what customers who viewed this product bought

38 Customer ratings

You have to be logged in to rate products.

20 Reviews

Smart Navigator

Served with love!

Doepfer MCV4

Midi-CV / gate interfaceMCV4 is a low-cost MIDI-to-CV interface that allows monophonic synthesizers to be controlled via MIDI.

This is what customers who viewed this product bought

Accessories & matching items

38 Customer ratings

You have to be logged in to rate products.

20 Reviews

Compare options

Smart Navigator