To the page content

Behringer HA8000 V2

199

Headphone Amplifier System

  • For stage and studio applications
  • 8 Independent stereo amplifiers in 1U
  • 2 Stereo main inputs for two independent mixes from all 8 output channels
  • 8 Direct inputs
  • Mono / stereo switch per channel
  • 6.3 mm Headphone output on both front and rear
  • Parallel main outputs enable the cascading of several headphones
  • Planet Earth "switching power supply" for maximum flexibility (100 - 240 V ~)
  • Model: 19", 1 HU
Available since March 2017
Item number 405451
Sales Unit 1 piece(s)
Number of stereo channels 8
Output Level Adjustment Per Channel Yes
Amount Of Inputs 8
Rack format Yes
$111
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

Eight channels for demanding recordings

The second-generation Behringer HA8000 is a headphone amplifier with eight independent stereo amplifiers for each of the eight output channel strips, and it can be used to control the volume of the entire mix during a recording session and then transfer it to mono. The great thing about this device is that there are always two different mixes to choose from, because there are two independent stereo inputs on the rear panel for this very purpose. If that's not enough, the individual mix levels can also be monitored for each headphone input via a stereo jack cable. There are no limits to the possibilities for individual headphone mixing, and as such the Behringer HA8000 V2 really proves its worth in complex recording sessions, when working with numerous signals, and with participants who all have specific requirements.

Behringer HA8000 V2 headphone amplifier system, front view

Intuitive operation of each channel strip

The amplifiers used in the Behringer HA8000 V2 can carry a load of up to 8 ohms. An eight-step LED display on each channel provides visual feedback on the output level and will also indicate signal overload, for instance. Each channel has a grey button, used to switch between the two mixes connected at the rear via jack cable, and a red button for switching the mix to mono. Each channel has a headphone output in 6.35mm jack format, and the volume can be adjusted for each channel via a level control. The master section consists of a five-step LED display and two volume controls, one each for the first and second mix. There is an additional headphone output for each channel strip on the rear, allowing two people to listen to one channel strip together, and allowing a total of 16 pairs of headphones to be connected overall.

Behringer HA8000 V2 headphone amplifier system, rear view

Also ideal for live monitoring

The Behringer HA8000 V2 was conceived both for use in the studio and at live events. Headphone amplifiers have become practically indispensable when making live studio recordings: They can be used to create individual headphone mixes for each person. The slim HA8000 can be conveniently installed in a 19" rack, taking up just 1U, and making it a real option for live monitoring, where it can function as the central control centre for in-ear monitoring. It could also be of interest for educational institutions – for example, if several pupils or students are working together on a DAW. This headphone amplifier is powered via an IEC plug, which is of course included in the price.

About Behringer

The company, which was founded in Germany by Uli Behringer and now manufactures its products in China, has been known for affordable and great-value equipment since its very first product, the Studio Exciter F. An array of mixing consoles (such as the Eurodesk MX8000), signal processors, and later sound amplification and monitoring equipment, has made it possible for countless musicians to fit out their home studios, practice rooms, and mobile PAs within budget limits that were previously unthinkable. The acquisition of other companies, including Midas, Klark Teknik, and TC Electronic, meant that new product groups were added - and also resulted in the technical expertise of these companies being incorporated into product development.

Flexible and intuitive monitoring

The Behringer HA8000 offers a flexible signal chain and intuitive operation. By switching the signal to mono, the mix can be monitored in one ear while the other ear listens to the recording room, for instance the unaltered sound of the acoustic instrument being played. In this way, the sound quality can be monitored and approved as the recording is ongoing, and if for any reason it's necessary to listen to one separate mix, in addition to the two connected mixes, this can be achieved via the dedicated inputs of the channels themselves. Ultimately, the two connected mixes are separated from the channel strip so that only the signal directly connected to the channel strip is amplified. If two sets of headphones are connected to one channel strip, users should make sure not to fall below the minimum impedance of 100 ohms so as to avoid loss of quality in the form of reduced output and distortion.

199 Customer ratings

4.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

features

sound

quality

106 Reviews

.
This is a high perfomance item and awsome value for your money.
.Seb 25.02.2021
I wanted the rackmount equivalent of the Mini Amp800, and this was it. Two main inputs, independent volume controls for each on all outputs, and aux inputs on every channel.

This adds added possibility of hooking aux inputs on some of the channels, requiring hooking-up the headphones to a different output, but with 8 channels, it leaves me with the possibility of also using this unit as a main monitoring unit on small gigs, guys use either corded headphones or BT transmitters and headsets, with the aux inputs hooked to different mixer outs and mixes...

I'm loving it. I just wish Behringer also had a 6~8 channel model with both two mains and bass/treble EQ on each channel.

That said I believe this unit provides the basics for cheap multi-monitoring outs, and that's already quite good at this price point.
handling
features
sound
quality
1
0
Report

Report

i
MAKE SURE YOU CHECK ALL OUTPUTS
iamphilipholm 18.03.2024
This unit is great when everything works as it should.
However, when I first ordered it I received a unit that had a distinct ground noise coming from output 8 as well as output 7 but much less. The other 6 were completely fine.
Sent it back and got a replacement unit, same issue
Sent that back and got a third unit which works without problems.

Doing a quick google, this seems to be a common issue with this unit.

I would imagine it's common that people don't try all outputs, so just wanted to write this to bring this issue to surface.
handling
features
sound
quality
5
0
Report

Report

H
A light-weight lifesaver on tour
HerrBecker 09.03.2022
Great little headphone amp that makes supplying the backline players with plenty of reference signal for accurate performance. Extremely easy setup and consistent reliability!
handling
features
sound
quality
0
0
Report

Report

f
totally recomended
fdbjb 27.02.2022
Just buy it, it does what it says and it's good on it. Perfect low budget amplifier!
handling
features
sound
quality
0
0
Report

Report

YouTube on this topic