To the page content

22.11 - 02.12

cyberweek-deal

Voodoo Lab Output Splitter Adapter PPAV

294 Customer ratings

4.7 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

92 Reviews

Voodoo Lab Output Splitter Adapter PPAV
$9.50
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1
MJ
Splitter splits like it's supposed to
Mick Jansen 23.01.2019
I bought this splitter after I needed another powersource for my new pedal. My Fuel Tank Junior only had five outputs of 120mA, 9V each. Like I said, I got myself a new pedal which was number six on the board. I figured that I could split the current of one of the outputs and share the current over two low current drawing pedals. Both pedals needed 40mA each, so splitting the 120mA would be a good solution.
I came across this splitter and it seemed to be the one I needed. You really need to carefully read the description of the splitter you are purchasing, because some are designed to split the voltage or even double the voltage. Make sure to choose the right one.
This cable is working fine in my setup. One of the splitters end has a white stripe to indicate that it is groundlifted (to make sure there is no buzz of hum when using it). My signal stayed perfectly quiet so I assume it's doing it's job. I experienced no cons so far.
quality
2
0
Report

Report

N
Voodoolab ftw
Nickmay3r 19.02.2022
Voodoolab is the king. Power supply, cables, customer service, support. 5 stars.
#1 voodoolab <3
quality
0
0
Report

Report

_
_obra_ 26.01.2022
Exsactly what I needed for my pedalboard.

Voodoo Lab easily becomes ''quality guarantee'' name for me.
quality
0
0
Report

Report

A
Just great for a pedalboard
Acis 24.05.2021
I use this on my current pedalboard and this splitter is a great addition!

I've done my research on what 2 pedals i can add on one output of my power-supply. So both of my pedals get enough power. There aren't really negatives. If i should give one the splitter could directly go into a pedal instead of needing a second cable.

I used this one because my power-supply is a VooDoo Lab Pedal Power 2Plus. I decided to keep within the same brand because I haven't had any problems with VooDoo Lab so far.
quality
0
0
Report

Report

O
Used it on my cs 12, with good results!
OutOfKey 29.05.2021
Good quality, also nice because you won't have any ground issues with it. Just remember to watch what ma your power supply actually puts out. Also: the connector is a bit too large for my cs 12 which caused some extra noise, my mistake though. But if you used it on the voodoo lab stuff you won't have any issues!
quality
0
0
Report

Report

TS
excellent cable economy solution
Theofanhs Siderhs 08.05.2021
Im use it to power up 2 pedals by 1 DC output of my palmer, very good solution, looks good and durable,I have 3 of them and my power supply have more catering posts so I can put even pedals in my board!
quality
0
0
Report

Report

P
Pedal power
PhilM 22.10.2014
I use two of these adapters very handy. You need to know how much each Ma the pedal needs as the Ma will be shared between the pedals. The cable clips onto the other cable or outlet of my pedal power securely, so no danger of it falling out. I haven't had any problems using them. I would recommend them but do sus out how much Ma you will need, usually written on pedal or in their manual. I contacted voodoo labs for advice and they were very helpful and fast to respond. Would be cool if they did them in different colours so you could easily see which outlet of your power supply it was in.
I use it with tube screamer, tuner and chorus and reverb pedal with no problems with him. Would recommend.
quality
0
0
Report

Report

W
Works perfectly
Woodieguy 18.06.2020
Bought this to power 2 pedals by splitting one output on my Pedal Power 2 Plus. Does exactly what it's supposed to do. No complaints.
quality
0
0
Report

Report

g
very useful
ggmusic 28.02.2019
This little cable comes in super handy when you need two pedals on one power output. They work on a single power supply as well as on a Multi-output power supply like a Voodoo Lab pedal power or any other. Low price, high quality. What more do you want?
quality
0
0
Report

Report

e
Life saver!!!
evernas 16.10.2018
Hi,everyone.If you need to split your currency signal and put it into another effect pedal that is your best option.It is not cheap,but worth it in cases like mine - very tight space and too many pedals.I use mine with VooDoo Lab ISO 5 power brick and it is fits like glove,but i am sure that it would be working with other power supplies too.Like cons i would say,that it seems somehow short and would be nice of VooDoo if they makes cable like this -one short end and one long one.Otherwise very good quality,it is VooDoo after all.Thank you, Thomann about your best services and fast shipment....and for given me choices to choose from.
quality
0
0
Report

Report

Voodoo Lab Output Splitter Adapter PPAV