Stairville DMX Invader 2420 MK II

Start 360°

This item runs exclusively on an operating voltage of 230 V and therefore requires a voltage transformer to run in your country of United States.

Light Mixer

Remake of the DMX Invader 2420 with master fader, many new features and software improvements. Contemporary controller for DMX spotlights such as moving heads, LED spotlights with RGBA/ RGBW colour mixing and many more. Backups of the light show or firmware updates can now be easily done via the USB port. Innovations of the software include phase shift in motion effects, and colour mixing of RGBW or RGBA LED spotlights.

Properties:

Controls up to 20 fixtures/ devices, each with up to 24 channels
20 Presets each with 10 colours and 10 gobos
1200 Scenes (60 banks, each with 20 scenes) and 20 chases can be programmed
"Effect generator" with 10 pre-programmed movement patterns (adjustable pan/ tilt position, range, "fade" time, "wait" time and loop), which also allows new users quick programming of complex shows
Up to 50 user-defined device types can be created and stored in the "device library"
Clearly structured arrangement of the controls and the LCD display for intuitive operation and simple programming of light shows

Technical data:

2x 3-Pin DMX outputs
484 DMX channels (including channel 481 for DMX fog machine and the channels 483-484 for a DMX strobe)
10 Pre-programmed movement patterns
20 Programmable chases (200 scenes per chase)
1200 Programmable scenes (60 banks x 20 scenes)
20 Presets, each with 10 colours and 10 gobos
20 Fixtures, each definable with up to 24 channels
24 Faders controlling the 24 DMX channels of each device
20 Cues (combines chases to a show)
20 Over layer/ overwrite functions to change channels in a running show
20 Center positions (for each fixture, a separate zero point is definable)
Password protection possible
Standard MIDI connector
USB connector for gooseneck lamp (included)
DMX and analogue strobe controllable
Connector for USB desk light
Additional USB port on the back for backups or firmware updates
Power supply: 230 V/ 50 Hz
Format: 19"/ 6 U
Installation depth: 100 mm
Weight: 5.3 kg
Size: 483 (19") x 264 (6 U) x 100 mm

30-Day Money-Back Guarantee

3-Year Thomann Warranty

Available since January 2014

Item number 323499

Sales Unit 1 piece(s)

Preset Function Yes

External Storage Yes

DMX - Universes 1

max. Channels 484

Ethernet No

Deal

Free of charge with this product

1x Botex USB Stick 16GB

$439

The shipping costs are calculated on the checkout page.

Sales Rank

in DMX Lighting Control Desks

Bundles & offers

Stairville DMX Invader MK2 Tour Bundle

$548

This is what customers who viewed this product bought

Eurolite DMX Move Controller 512 PRO

Botex DC-2448 Light Operator

$235

85 Customer ratings

5 50 Customers 4 20 Customers 3 13 Customers 2 1 Customer 1 1 Customer

4.4 / 5

handling

features

quality

Review guidelines

47 Reviews

Customer review: Stairville DMX Invader 2420 MK2

Anonymous 27.05.2015

I purchased one of these for an installation job. The particular application was to illuminate a display by controlling a set of 20 LED PARs with just a handful of scenes programmed to cross-fade slowly in a continuous loop.

The controller is designed to work with fixtures having up to 24 channels with fixed DMX addressing, i.e. at intervals of 24. This means the set of 20 LEDs I was using didn't leave any scope for expansion even though these particular fixtures occupied only seven channels each.

Programming of scenes was fairly straightforward and I achieved the desired results even though configuring fade-times was slightly confusing; there being different ways of achieving that: 'internal' and 'external' modes. I tried programming the scenes into a chase but found the best results for my application was to use auto scene recall without bothering with chases. As for programming 'cues'...didn't even attempt that!

Anybody who has had even moderate experience of programming for intelligent fixtures using the more basic Stairville products should have no problem adapting to the much more capable Invader 2420 MK2.

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Excelent, and simple

NDDserviss 28.09.2021

Very good packaging, built quality, and very simple to use.

Report

Stairville DMX Invader 2420 MK II: small and handy.

mim. 20.11.2019

Small and handy light mixer. Easy to operate, functional. Good choice in its class.

Report

Show translation

Show original

Unfortunately there was an error. Please try again later.

le firmware doit progresser!

Patrick886 30.01.2014

Ce pupitre aux nombreuses possibilités de programmation intègre des fonctionnalités remarquables que l'on ne rencontre habituellement que sur des pupitres haut de gamme.
A ce jour, en revanche il possède deux défauts majeurs :
Il n'est pas possible de réordonner à notre convenance les faders des fixtures ("remapping").
L'afficheur permet un contrôle simultané des paramètres par bloc de 8 faders (1-8; 9-16, 17-24). La visualisation des paramètres d'un bloc autre que celui en cours de paramétrage oblige alors à bouger un des faders de la banque concernée et donc de dérégler sa valeur en cours.
J'attends que Stairville corrige, via un tout prochain firmware ces deux problèmes qui rendent l'exploitation de ce pupitre particulièrement ardue.
Sans cette correction de firmware, je déconseille vivement son acquisition.

Report

Read all reviews

Stairville DMX Invader 2420 MK II

Light Mixer

This is what customers who viewed this product bought

85 Customer ratings

You have to be logged in to rate products.

47 Reviews

Smart Navigator

Served with love!

Stairville DMX Invader 2420 MK II

Thomann Cyberweek Deal

Light Mixer

This is what customers who viewed this product bought

Accessories & matching items

85 Customer ratings

You have to be logged in to rate products.

47 Reviews

Compare options

Smart Navigator