With our cookies we would like to offer you the best shopping experience possible with everything that goes with it. This includes, for example, suitable offers, personalized ads and remembering preferences. If this is okay with you, simply agree to the use of cookies for preferences, statistics and marketing by clicking on "Alright!" (show all). You can withdraw your consent at anytime via the cookie settings (here)
Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.
After logging in you will also find all items you can rate under rate products in the customer centre.
I have my kemper mounted in a rack case which I use for touring etc. I have made a custom plate on the back for easy access to the connectors I use. Everything is clearly labelled so I just quickly plugin what I need.
This connector serves 2 purposes! 1) It stops any wear and tear on the main Ethernet connector on the back of the kemper. So if anything went wrong, I could just replace the Neutrik one, and I’m back in business without having to send my whole Kemper away! 2) It allows me to use Neutriks Ethercon Connectors on my pedal board cable. On the Kemper pedal board itself, it has an Ethercon connector, which stops the connector from being pulled out or damaged. So I wanted to do the same thing on my rack version. Which this has allowed me to do.
Fantastic product!
I have my kemper mounted in a rack case which I use for touring etc. I have made a custom plate on the back for easy access to the connectors I use. Everything is clearly labelled so I just quickly plugin what I need.
This connector serves 2 purposes! 1) It stops any wear and tear on the main Ethernet connector on the back of the kemper. So if anything went wrong, I could just replace the Neutrik one, and I’m back in business without having to send my whole Kemper away! 2) It allows me to use Neutriks Ethercon Connectors on my pedal board cable. On the
I have my kemper mounted in a rack case which I use for touring etc. I have made a custom plate on the back for easy access to the connectors I use. Everything is clearly labelled so I just quickly plugin what I need.
This connector serves 2 purposes! 1) It stops any wear and tear on the main Ethernet connector on the back of the kemper. So if anything went wrong, I could just replace the Neutrik one, and I’m back in business without having to send my whole Kemper away! 2) It allows me to use Neutriks Ethercon Connectors on my pedal board cable. On the Kemper pedal board itself, it has an Ethercon connector, which stops the connector from being pulled out or damaged. So I wanted to do the same thing on my rack version. Which this has allowed me to do.
Fantastic product!
quality
0
0
Report
Report
d
Very nice adaptor, but a bit expensive.
dirtymouse 03.03.2015
This is a very nice Cat-5 adaptor, but it's a bit expensive if you need to use more than a couple. Be careful, once installed, the rear PCB can be pulled off the external krone housing, severing the solder connections, dropping it to less than gigabit speed, or worse, causing it to fail altogether. Basically, it's a weaker connection on the internal side, were tight internal cabling can pull too much, if there is not much play. Includes self tapping screws (appears to be the only Neutrik connector that includes them).
There are good accessories for this, a external cap door cover, and colour plastic labels.
This is a very nice Cat-5 adaptor, but it's a bit expensive if you need to use more than a couple. Be careful, once installed, the rear PCB can be pulled off the external krone housing, severing the solder connections, dropping it to less than gigabit speed, or worse, causing it to fail altogether. Basically, it's a weaker connection on the internal side, were tight internal cabling can pull too much, if there is not much play. Includes self tapping screws (appears to be the only Neutrik connector that includes them).
There are good accessories for this,
This is a very nice Cat-5 adaptor, but it's a bit expensive if you need to use more than a couple. Be careful, once installed, the rear PCB can be pulled off the external krone housing, severing the solder connections, dropping it to less than gigabit speed, or worse, causing it to fail altogether. Basically, it's a weaker connection on the internal side, were tight internal cabling can pull too much, if there is not much play. Includes self tapping screws (appears to be the only Neutrik connector that includes them).
There are good accessories for this, a external cap door cover, and colour plastic labels.
quality
0
0
Report
Report
A
Excellent for making up rack panels
Anonymous 10.05.2016
I have three of these in a rack panel of mixed connectors to allow me to plug rugged Ethercon cables into my other standard rack equipment (like switches etc).
They're really rugged on the front face and made of metal, but I would say be careful not to pull the back off them because the rear connector isn't the strongest.
quality
0
0
Report
Report
d
dna72 15.03.2019
Quality product , reliable and fast for installation
quality
0
0
Report
Report
M
Easy to use
Mark5771 22.09.2014
Very easy way to get a Neutrik connector onto a panel and extend an existing connection or convert it to Neutrik. You simply plug a normal ethernet connector into the back of this one, back to your original connector, and it is now ready for the Neutrik cable. No wiring or soldering needed. Make sure you buy a panel with the correct size cutouts for the mount and it is very easy to screw it into place and the job is done.
quality
0
0
Report
Report
A
Great product
Anonymous 21.02.2015
Part of a rack panel hook-up I built. A through connector for rj-45 cables with sockets on both sides. Easy to install and works great. Much quicker and easier to connect stuff and it saves wear and tear on the expensive rack equipment. Highly recommended for it's purpose.
quality
0
0
Report
Report
L
Good quality but
Letmelfy 28.03.2020
A light protective casing could be nice
quality
0
0
Report
Report
A
Very good connector
AROSS 11.01.2019
You can trust Neutrik. Solid
quality
0
0
Report
Report
V
Neutrik NE8 FDP-B
Vinny 11.11.2017
Neutrik! Grade A. Even comes with mounting screws. CAT cable plugs into the back so no crimping necessary. Plug in & GO!
quality
0
0
Report
Report
M
MrFreekie 29.09.2014
Fantastic, I use lots of these, perfect for making patch panels. Love the black finish.