Neutrik BPX L

52 Customer ratings

5 47 Customers 4 4 Customers 3 1 Customer 2 0 Customers 1 0 Customers

4.9 / 5

quality

Review guidelines

26 Reviews

$0.79

The shipping costs are calculated on the checkout page.

Very helpful & necessary!

Nikos As 18.01.2019

This is a very helpful & necessary accessory if you want to make cables with a diameter at 7.00 or 7.50mm. You can combine it with Neutrik connectors such as NP2X, NP3X, NP2X-B, NP3X-B, etc.

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Might make making cables faster and easier

Funeral Musician 23.01.2023

Since the diameter of the cable I had was 7.2 mm, and the maximum cable diameter specified by Neutrik for the NP2RX plugs was 7 mm, I bought a few of these to make making my own cables a little bit easier. I threaded the cable through one of these bushings and, since the hole in them is 8 mm in diameter, there was a gap around the cable, which I did not like. Then, I tried threading the cable through one of the bushings that came with the NP2RX plugs, and, surprisingly, it fit! Putting them on the cable was not easy, but at least there was no gap anymore. If the gap is not a problem either function- or cosmetics-wise, these bushings can make making your own cables faster and easier. Otherwise, I would only recommend these bushings if the diameter of the cable you want to use is the same as the diameter of the hole, which is 8 mm.

Report

useful article

Piotr Krupa 27.11.2018

It's useful for thick cables with Neutrik jacks

Report

Neutrik BPX L for thick cables

LeonardS 04.05.2019

If you have a thick cable and want you pluf to be stable this is a must have solution. Don't think twice it is alright.

Report

Neutrik BPX L

Served with love!

Neutrik BPX L

52 Customer ratings

You have to be logged in to rate products.

26 Reviews