Jaspers 4D-145B

Works Perfectly

Only "issue" is that it takes a while to setup

I suggest you prepare the following
1) Cordless Drill with the correct HEX BIT (you will adjusting the fittings a lot)
2) Measuring Tape. This is the only way to get things aligned properly. Make sure each T-fitting is the same distance from the floor (for the left and right A stand) so you end up with a perfect stand
3) Bubble Level. Make sure all your horizontal tubes are level. Also when you are adjusting the holders, You can use the level to make sure the 2 holder arms are parallel. I used an iPhone App, but a bigger physical bubble level will be more useful
4) make sure you jam the fitting into the horizontal bar then u use the locking clamp to make sure it does not twist. Once you do one side, repeat on the other side. Make sure while u are jamming the opposite side, the original side does not pop up. I was lucky my 88 key piano did not drop down the next day. Again double check

I ordered this stand and immediately proceeded to put it together without consulting the manual or youtube. What could be hard about setting up a stand right? Wrong move.

I didn't lock the fasting rings, causing my Moog and Minilogue s on the uppermost tier to turn upside down and come sliding down. Just as this was happening, I was holding my Korg M1 that I was trying to insert on a middle tier, creating the crazy situation of me holding 3 synths with nowhere to go. To top it off, my Kronos on the lowest tier came crashing down on the floor because I didn't properly lean the two support beams on the extra lateral beam and didn't set the diagonal sides in the right angle.
I'm telling you this so you may avoid this.

Putting this stand together requires:
- Planning - where do you want to put what piece of gear and at what angle?
- Read the manual or watch youtube howto's first
- Use a spirit level to make sure everything is straight
- Use a centimeter to make sure all the angles are correct and are consistent L/R
- Fasten everything properly using the included hex tool (Be prepared to do a lot screwing as you adjust/perfect your setup)

Once set up, it's a brilliant stand. I love the amount of space at the bottom, I now have a small rack of 19" inch gear there and there's still plenty of room for sustain pedals and so on. The stand is light weight and can be expanded with all kinds of extensions. The lateral beams can be used to esthetically guide cables using cable ties which looks very good (I use Thomann V2030's).

I've only ever owned X stands in the past to mount 2 boards on. Now i've purchased an 88 noter i wanted something to hold my current collection & not worry about breaks or stability.
The package arrived in a simple box. Setting it up is a breeze, although a 2nd pair of hands would be useful as you instal the final end into place.
This thing is solid & very stable. As i've previously said the X-stands i used in the past were ok but when you start playing fast you can start that horrible & off-putting forwards & backwards rocking motion. This has none of that. Playing fast Boogie Woogie doesn't start the dreaded wobble. I will point out this stand does rock slight left to right if you push & pull it it but it never happens as you are playing so it does supply a very solid platform. I've got a QS8 on the bottom then my M1 then DX27 & an MK100 above that. Great! I will be repositioning the top 3 boards over so i can mount some smaller items next to them in the future. Thomann sell a gamut of add-ons for these this so they are very flexible in a home studio or live platform.

With my gear collection growing I needed a stand, it doesn't take long before Jaspers stands enter the frame, with all the reports saying how versatile they are and the build quality being top notch.
I was pleasantly surprised at the price range and brought one.
The delivery and communications were fantastic, but what really surprised me was the quality and finish of the of the stand itself, it really did show what value for your money you get.
As I get more equipment, I am thinking of getting another stand, I wouldn't even start looking around and will go straight for a Jaspers as you usually get what you pay for, but in this case I honestly feel you get more.