SS
Fitted asian Licensed Floyd Rose trem
I bought two of these to replace the broken ones I had on a Licensed Floyd Rose Tremolo made in asia ( from a Maison guitar ).
The screw heads of the original ones were larger, so I wasn't sure these would serve it's purpose, but they did.
The screw heads of the original ones were larger, so I wasn't sure these would serve it's purpose, but they did.
2
0
Report
HX
Perfect Replacement
The stock bridge screw got broken after year of heavy usage. I replaced them with the Ibanez 2LE2-B on my Ibanez RG2550z.
Pros: easy to install and they just perfectly looked they were made for this guitar.
Cons: None.
Of course I would recommend this for anywone with a guitar that has a broken bridge screw
Pros: easy to install and they just perfectly looked they were made for this guitar.
Cons: None.
Of course I would recommend this for anywone with a guitar that has a broken bridge screw
0
0
Report
S
Must upgrade for tremolo units
This is a small and not expensive upgrade for Ibanez tremolo units. If you are tuning stability freak like me or just want everything to work good this is a must. This is a locking stud so this stud stays perfectly in place after tremolo using. It is a easy install but big upgrade.
0
0
Report
b
Only includes 1 screw!
The screw is perfect for an Ibanez EDGE or Lo-Pro EDGE (what I used it with), but note that the pack only includes 1 screw and not a pair - I didn't realise this before ordering and had to buy a second one to refurb my JEM.
0
0
Report
A
great spare part
what can I say,
the older ones in my Ibanez broke up, the little screw inside had the head wreck.
change with this, very easy to install and setup
no problem at all.
the older ones in my Ibanez broke up, the little screw inside had the head wreck.
change with this, very easy to install and setup
no problem at all.
0
0
Report
A
Excellent product!
I used this to replace the original studs. Excellent quality, instant improvement in tuning stability, no problems afterwards!
0
0
Report
v
Does what it should do, fits perfectly in bridge of mine Ibanez RG7620.
0
0
Report
S
Easy upgrade
An easy upgrade for my Ibanez RG with an Edge Pro trem. Cant fault it!
0
0
Report
S
Fits perfectly
Having replaced the original tremolo height adjustment screw on the Ibanez RG3727FZ with the Ibanez 2LE2-B, it's quite impressive how well it fits. Although it might have a slightly different look than the original one, it manages to blend in pretty well with the guitar's overall aesthetics.
0
0
Report
Kv
Does what it's supposed to do
brought my rg550ltd back in top condition.
The originals were stuck in place and took some work to get out.
Putting in these helped setting up my guitar for lower action.
The originals were stuck in place and took some work to get out.
Putting in these helped setting up my guitar for lower action.
0
0
Report