Harley Benton Fusion-T EMG HT Roasted SBK

The playability was fine I raised the action on G string a tiny bit and the guitar was perfectly Intonated The finish was nice neck feels amazing no fret sprout but then come 3 major issues the neck was not aligned with the body but it was a easy enough fix unscrewed the neck a quarter turn on each screw bent the neck where I wanted it and it was good and the second issue is I didn’t get anything no Allan key or any tool to adjust the truss rod I’ve always had a tool to adjust the truss rod in all the Harley Benton I’ve purchased but I didn’t have that or anything to adjust the saddle height but the biggest issue was in the neck pickup and in the bridge the neck pickup hissed couldn’t make it stop luckily I had a spare neck pickup it was also the hot 70 neck emg so I replaced it with one I had taken out of another guitar and no hiss but there was a crackling sound I could get it to go away I seen a YouTube video on a previous Harley Benton that had grounding issues with the hard tails because the paint is t conductive and I was confused because EMGs don’t need a ground wire but there it was under the bridge so I took it off sanded the paint away till the bottom was bare metal and it’s fixed now for 500 USD plus going out buying sandpaper and replacing the neck pickup that should not have been the issue especially the bridge just use a different style hard tail that has conductive paint I’m happy I got it and is a great guitar sounds amazing and feels amazing but to many QC issues. it was a real big disappointment that bridge not being conductive is not acceptable and for someone getting this who doesn’t know how electronics works that’s very bad way to start your guitar journey