Customer reviews about Harley Benton Fret Rocker

M

Edge is not even

Mostro 28.07.2021

The longer edge is not even, it is as if the cut it from another piece of metal on that side and the did the cut wrong, so it jumps a uneven, if that makes sense. still if you take care measuring inside the area before the cut, you can get away with it. Bad quality, look for something else.

5

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

M

Rough but it works.

MacGee 10.09.2022

Bearing in mind this product was very cheap so my expectations were low.
However, I was pleased to find that when I checked the edges they were flat. At least when I checked it with an engineer's ruler I couldn't see any gaps whatsoever.
However, where this product isn't so good is the finishing quality. The burring on the cut edges is sharp. This need to be carefully sanded/smoothed before use. You could cut yourself or damage your frets.
But this was ok for me as the main function of straight edges was achieved and a bit of smoothing for a cheap unfinished product can be expected.
Recommended for anyone on a tight budget who doesn't mind finishing off the product.

3

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

m

Not machined properly...

mystovski 25.01.2024

The point of spending money on a fret rocker is that it's supposed to be straighter than a random object like for instance, a credit card. Unfortunately this one is machined very poorly and it's just not fit for the purpose. The sharp edge is slightly bent, which looks a bit like they used a blunt tool to cut it. What is good about it? You can take some sanding papers and try to even out the edges by putting a sanding paper on something very flat like a window glass. This shouldn't be too difficult. But should it come like this? Hell no.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

CR

Does the job

Curt R 11.10.2020

I'm not a luthier or guitar tech. I just need something cheap and cheerful to check the frets on new guitars to see which ones need to go to the tech for fretwork.

Does the job. There is a little tiny line protruding, on the longest side, where it looks like the machine cut started and finished. This isn't really a major issue, as long as you don't put that bit on the fret!

I was worried about it having sharp edges, as it's so cheap, but the edges are ever so slightly rounded off, so very little risk of cutting your fingers with these.

I'd recommend it, for the money.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

D

Useful tool

Davor_Zerjav 02.03.2022

It's ok, but it is quite sharp on edges, so first you have to sand it .

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

J

OK Rocker

JensWel 20.10.2022

For testing fret heights by rocking.. Had to make it straight on sides by sanding.. Had to round edges (they were sharp) . But that done - it does the job and frets are now close to perfect on several guitars

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

t

Goede fret rocker

teleman 22.11.2021

Hij doet wat hij moet doen.
Goed afgewerkt, geen scherpe kantjes

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

F

An essential tool!

FStaff92 02.01.2023

An essential part of any DIY guitar tech's toolkit. Works exactly as it should, can't fault it. I've seen more expensive fret rockers on the market & I'm not sure what more they're offering than this nifty little unit. All sides perfectly level & I was able to level the entire neck of my Squire using this little tool and a fret file.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

i

Not straight.

ianmc 30.12.2020

Not all sides are straight, makes the tool redundant really as I don't trust it at all now. It will show frets are level using one angle, and the same 3 frets on a different edge will show high frets. Would not recommend.

4

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

J

WASTE OF MONEY

JadeS 20.03.2023

They say this tool is precise but, after trying to fret level my guitar i realised some sides are not straight at all. Normally i don't bother leaving reviews but i made an exception to tell people to take heed of this warning. If you want to do this type of work don't reley on Harley Benton's cheap versions, instead buy from a reputal manufacturer that actually can produce what they claim.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Harley Benton Fret Rocker

379 Customer ratings

You have to be logged in to rate products.

130 Reviews

Served with love!

Harley Benton Fret Rocker

379 Customer ratings

You have to be logged in to rate products.

130 Reviews