Customer reviews about Harley Benton Parts JB TO Pickguard J-Bass

J

Well made, good value

JonnyPf 07.12.2017

This is a well made and good value for money pickguard that fits both my Harley Benton Fretless JB and my Marcus Miller V7 bass.
The fit is 'nearly' perfect on the HB Fretless Jazz bass, whilst the fit on the Sire V7 is not quite perfect but in my opinion good enough.
The HB Fretless does not have any screw holes in the body, so you may want to make some, personally I have just used double sided tape, as the fit is snug enough.
Some of the holes on the Sire V7 do align with the Pickguard, some do not - I elected to screw some in and use double sided tape for any other areas. Again, the fit is snug and secure.
The Pickguard is well made and the tort is a dark brown and subtle style - looks good!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

D

Didn't really fit

Donnacha 26.02.2019

I got this for a Fretless fender jazz bass I was putting together. The project was only a personal hobby and the budget was a little tight so I decided to get this cheaper pickgaurd. Unfortunately it didn't really fit the jazz bass body well.

The product itself was good, didn't feel cheap and it looked nice so i have no complaints on that front. Im guessing it would be better suited to an actually harley benton jazz body.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

YM

Won't fit on Harley Benton

Yasin Meera 30.05.2021

Quality is good, but despite the label it wouldn't fit on Harley Benton JB-20, only two holes somewhat line up and it leaves a gap between itself and metal plate.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

B

Not Plug n Play

Belovski 26.02.2019

Liked the finish when I got it out of the bag but that vibe was ruined by a nightmarish installation process. I was expecting it to just glide onto my Squire Jbass but I was forced to drill new holes as the pickguard?s didn?t match, had to grind a bit so my PU?s could fit and it still ended up with poor fit.

Not the best experience.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

AH

Perfect

Ageing Hippy 31.05.2018

Ordered with the J-Bass kit I've reviewed also. Surprisingly good for the money. I needed to fill and re-drill a few of the screw-holes in the body of the bass, but that's to be expected. Looks fantastic over the antique gold finish I applied to the bass.
Highly recommended.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

F

Great Value for money

Fordy 01.07.2015

I bought this to replace the scratch plate on a 1980 Tokai that was covered in paint. This one looks great. The screws holes match up with the original ones and the slot for the pickup fits it perfectly.
Really happy with the end result.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

B

Doesn't fit

Bassman336 18.09.2018

unfortunately it didn't fit on my harley benton bass nor on my squire bass.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

N

Does the job.

Nutshell84 21.02.2024

Nice tort. scratch plate. Just be aware of your own measurements, it wasn't Thomann's fault but mine. I had to do some filing and cutting to make mine fit (it's HBs own J CC65, it didn't fit) so buyer, do your homework!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

ADL1 07.02.2020

Fits nicely on my Squier affinity; not all the screw holes match up, but that is to be expected with an off-brand pickup, imho.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

v

Perfect for my old Squier Bass

vicferrari 24.07.2018

I have an early 90s Japanese SquierJ Bass and this pick guard is the best-fitting one I've ever had - The Fender ones didn't fit as well!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Harley Benton Parts JB TO Pickguard J-Bass

71 Customer ratings

You have to be logged in to rate products.

17 Reviews

Served with love!

Harley Benton Parts JB TO Pickguard J-Bass

71 Customer ratings

You have to be logged in to rate products.

17 Reviews