M
Great Pot, good connections, quality feel.
Very good pot. Used to MOD an old guitar humbucker to coil split.
Very easy to install and use, only CON is it is quite tall! you MAY have to remove some material inside the guitar to make this fit in place of a regular pot.
I had to remove 4mm of material from the body inside my Strat to get the scratchplate to fit level again. This is on a standard USA strat in the VOL position, so as you can see if you are less confident with tools/basic luthiery, maybe ask your local guitar shop to fit it in this case.
Overall though, great sturdy pot which will last for years, great solid feel, no interference on the pickups when it is pulled (unlike some) so would reccommend, just check dimensions first!
Very easy to install and use, only CON is it is quite tall! you MAY have to remove some material inside the guitar to make this fit in place of a regular pot.
I had to remove 4mm of material from the body inside my Strat to get the scratchplate to fit level again. This is on a standard USA strat in the VOL position, so as you can see if you are less confident with tools/basic luthiery, maybe ask your local guitar shop to fit it in this case.
Overall though, great sturdy pot which will last for years, great solid feel, no interference on the pickups when it is pulled (unlike some) so would reccommend, just check dimensions first!
0
0
Report
t
I really like 99% of Goldo products, but this time it's just a pass. Yes, it got the job done, but it feels a bit flimsy compared to the Allparts and Fender versions. After fitting, the axle has a little play in it, which makes the knob go ka-klunk after I release it. It's the first time I'm using it for my builds (because the Allparts version wasn't in stock), so maybe it's just this piece I have, and not all of them. It's not a deal breaker, but if given the choice I'd stick to Allparts for my builds.
0
0
Report
g
Works Great
Bought to replace pot in a bass guitar. Works Great.
0
0
Report
j
nice functional pot!
I took this pot to enable transition between parallel/series connection on humbuckes. It works fine and it gives you a feature nice to have in a guitar, but I think the quality is a little bit cheapish...
0
0
Report
A
Good quality
I am actually a fan of a different brand, but I really can't complaint about these.
They have been working great in my guitar for 2 years.
You are sometimes able to hear the switching through the amp, but I have encountered that problem with most of my push-pull pots.
Very good quality.
They have been working great in my guitar for 2 years.
You are sometimes able to hear the switching through the amp, but I have encountered that problem with most of my push-pull pots.
Very good quality.
0
0
Report