To the page content

22.11 - 02.12

cyberweek-deal

Doepfer A-110-2

29

Basic VCO for the A-100 modular system

  • Voltage controlled oscillator
  • 3-Position toggle switch
  • Linear FM input and soft-sync input
  • Tune control range can be set between approx. 1/2 octave and 4 octaves via a jumper
  • Width: 8 HP / 40.3 mm
  • Depth: 50 mm (measured from the rear of the front panel)
  • Power requirements: + 12V: 150 mA (warm up period about 30 seconds), 60 mA (continuous operation) -12V: 30mA
Available since December 2014
Item number 354853
Sales Unit 1 piece(s)
Analog Yes
Digital No
Width 8 TE / HP
variants Doepfer
$111
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

29 Customer ratings

4.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

features

quality

15 Reviews

A
High quality, and surprising differences from A-110-1
Anonymous 18.12.2015
The A-110-2 Basic Oscillator is a great-sounding oscillator, with interesting additions to the A-110-1 Standard Oscillator. While the -1 has a 5-position switch for octave, the -2 has only 3 positions. The -2 also sacrifices the sine output from the -1.

While the -1 has linear FM (i.e. a second 1V/Oct CV input with an attenuator), the -2 also has exponential FM. And while the -1 has a sync input, the -2 has both hard and soft sync inputs. The -2 has only one input for pulse width - but that seems like a reasonable sacrifice for the other features.

I find that the A-110-2 doesn't track as well as the A-110-1 in high ranges, and the sound is a bit "grittier" than the A-110-1. I actually like the square wave output of the -2 better than that of the -1, and since I have two of each, I tend to use them together to add texture to patches.

All in all, for the small price savings and the 2HP difference in width, I would tend to buy the -1 first - but I would buy a -2 to go with it, too.
5
0
Report

Report

KZ
Excellent !!
Kamil Z. 16.05.2016
Really great VCO it complements the Standard more expensive VCO very well. the soft sync is a must and differs a lot from hard sync, be careful though this unit is rather higly tuned and 0 pos does not correspond to 0 on the standard VCO, you can tune it down 2 octaves so no issues but will remain 1 octave above the lowest setting of the standard 110.

Higly recommended.
2
0
Report

Report

A
Good compact VCO
Anonymous 15.03.2016
Affordable and compact which is good if rack space is a concern. I use it as an addition to my Arturia Microbrute but it sounds great even on its own with a few effects.
0
0
Report

Report

O
..is doepfer
Oskars 30.12.2016
Great features. Solid sound. Not a very shallow module.
0
0
Report

Report