Bugera 6262 Infinium

The Bugera 6262 Infinium is a beast of an amp at an unbelievable price. Now I know, all you valve amp purists out there are probably going to stick your nose up at anything that comes out of China but more fool you. This amp has tone, volume and is reliable as a house brick. The valve check system and auto bias features mean valves are no longer a headache and really does work well. I've been gigging mine for a year or so now along side my usual Peavey 6505 and it holds it's own against the Peavey with no reliability issues what so ever. The only problem I have found is there is a little more noise than I would like on the high gain 'lead' channel but the addition of a noise gate pedal easily solves this. All in all this is a killer amp with a lovely tone both clean and hot at an incredible price. You should forget your hang ups and try one NOW!

The next amp for me personally that could dethrone this one is Hughes&Kettner TubeMeister Deluxe 40 and it is 1000zl more (+- 213 euro)

So I use this as my bedroom practice amp. Yup, you've heard me right.

I use this as my bedroom practice amp which I often use at 4 a.m. while my mum sleeps almost next door.

No attenuation, no volume box or anything other needed. Just a 120-Watt Valve Amp and 4x12 v30/

The amp has no master volume but it doesn't really matter. The volume knob works just fine and I am so glad that I have finally tested it on my own.

It is no louder/harder to tame than my Marshal DSL1 @1W/full power mode or Joyo Zombie XL with 1x12. Actually I think it is easier on Bugera because knobs are bigger and easier to adjust with small increments.


I really cannnot say anything bad about this amp except for none-standard footswitch that you cannot buy any more... I really hope thomann can come up with something here...


So what you get:

- a 120-Watt full Valve Amp that can be used anytime throughout the day and night; even in a flat/
- 2 channels and a half. CLEAN/CRUNCH (shared knobs) & LEAD
- a footswitch that you can use to turn on/off FX loop, Clean/Crunch, Lead.
- 6 preamp valves
- 4 6L6 poweramp valves
- absolutely amazing look (you can see power valves glowing and all other chrome guts)
- compared to Peavey 6505mh which cost almost exactly the same... it is just not even worth any words to compare those two/ Bugera is just superior in any possible way/



The footswitch alone deserves a few words of prize and gratitude. You can toogle between clean/crunch and lead channels and turn on and off FX loop. What else could you wish for!? This covers all my needs and of course full separate crunch channel would be amazing but I really cannot say anything bad about it/ Sometimes I wish my clean would be louder but since it shares the same volume knob of the crunch channel it is often too quiet. But hey... look at the price... and tell me which other amp in this price range offers you 3 (2.5 really) channels: clean/crunch & lead.

Exactly... none.

Crunch is amazing. Really crunchy and punchy with full body sound. Lead is a bit thin and harsh but I play with all the EQs @ 12 o'clock and rather quietly.

If you could buy a spare footswitch I would buy one straight away/ I still hope it will work just fine for years to come.

I cannot recommend this amp enough... really... and I am absolutely super picky. You just cannot get anything even close for what this great amp has to offer/


I bought Peavey 6505MH a few days ago and returned it because for almost exact same price... it was worse all round... From the sound to features and built quality.

I wish I could compare it to 5150 Block Letter or any other full size Peavey or other 5150 but... just look at the price... and now look again. You would have to pay 2x, 3x or maybe even 4x more.


I am a gear addict and it is so hard to actually buy anything else after the Bugera 6262... You just have to pay more for less lol which is like " Hol'Up, wait a min..." and then you question reality lol

Want to save money? Buy Bugera 6262 + Harley Benton 4x12 v30 and it will cure 98% of your g.a.s. .

Been after one of these amps for a long time now and I finally have one. upon unpacking this amp it immediately looks the part on top of the bugera 4x12 I use. Many people in the past have slated bugera saying its not the same as buying the real thing etc but its the same as anything else. every amp or guitar you buy regardless of it being £3000 or £300 there will be duds and some design faults. Take gibson LPs vs the LTD EC401 as prime example same design same materials same quality and its the same here with this 6262. its based on the 6506+ and personally I think its slightly better in tone. I used one of these in the studio against the Peavey and even though there was little difference the bugera shone through. This has the same number of tubes and controls etc. Has EQ, reverb and presence controls for both clean and lead which is very useful as clean and lead usually need different eq and this eliminates the need for a pedal. Switchable OHM setting. 2 loud speaker outs, fx loop which you can control with the switch pedal you get as standard. you can also switch the reverb on and off on both channels with the foot switch. And another feature i like about these bugeras is you just take a power tube out and put new one in, no messing around. You can also use 4 different 6l6/5881 to suit your tonal needs. Another good thing about this amp is the preamp output on the back which you can put directly into another head or studio interface for more tonal customization. There are some small draw back to this amp but nothing to sweat about. the leather covering is not very strong and will mark easily. Stock tubes are cheap chinese tubes and could do with changing to sweeten things up and the fuses are very sensitive so you will need a few spare but this is a good thing as it protects the circuitry. All in all the price you pay for what you get is astonishing. very good value for money